平面鋼制閘門是給排水工程,水利水電等工程中常用的攔水,止水設備。平面鋼制閘門由閘門板,閘門框,密封橡膠圈和可調節楔形壓塊等部分構成。可以通過調整楔形壓塊來保證平面鋼制閘門用久之后磨損漏水的問題。平面鋼制閘門使用優秀的鋼板為基材,采用表面噴砂噴鋅的方式來保證閘門的耐腐蝕性和耐銹性。止水方式采用大眾的橡膠止水。平面鋼制閘門的整體結構堅固合理,性能可靠,耐磨性和耐腐蝕性強,安裝和維護等操作方便。
Flat
steel gates are commonly used water blocking and sealing equipment in
water supply and drainage engineering, water conservancy and hydropower
engineering, etc. The flat steel gate is composed of gate plates, gate
frames, sealing rubber rings, and adjustable wedge-shaped pressure
blocks. By adjusting the wedge shaped pressure block, the problem of
wear and water leakage of the flat steel gate after prolonged use can be
ensured. The flat steel gate uses excellent steel plates as the
substrate, and uses surface sandblasting and zinc spraying to ensure the
corrosion and rust resistance of the gate. The water stop method adopts
Volkswagen's rubber water stop. The overall structure of the flat steel
gate is sturdy and reasonable, with reliable performance, strong wear
and corrosion resistance, and easy installation and maintenance.
平面鋼制閘門在使用時總會遇到一些或大或小的故障家莊電動伸縮門 保定桌椅 保定水處理設備 河北機械加工 保定養老院 保定防水,定期維護保養鋼制閘門可以延長使用壽命。下面是一些簡單的維護操作,客供大家參考:
Flat
steel gates often encounter some major or minor malfunctions during
use, and regular maintenance of steel gates can extend their service
life. Here are some simple maintenance operations for your reference:
1.由于海水或者河水的沖擊,可能會引起平面鋼制閘門的震動。為了減少閘門的震動幅度,我們可以在閘門板上加設放浪格柵,以達到削減海水或者湖水的沖擊程度。
1.
Due to the impact of seawater or river water, it may cause vibration of
the flat steel gate. In order to reduce the vibration amplitude of the
gate, we can add a wave grille on the gate plate to reduce the impact of
seawater or lake water.
2.在水流速度極快的條件下,由于建筑過水斷面時常發生變化從而導致水結構面發生變化。排水設施水汽不足從而導致閘門槽和預埋件之間發生了氣蝕。解決方法為:對已被氣蝕的部分采用免氣蝕材料進行補充,盡可能的保證兩者之間的水位平整。
2.
Under extremely fast water flow conditions, changes in the water
structure surface often occur due to changes in the water flow
cross-section of the building. Insufficient water vapor in the drainage
facilities resulted in cavitation between the gate slot and the embedded
parts. The solution is to use non cavitation materials to supplement
the parts that have been cavitation eroded, and try to ensure that the
water level between the two is as flat as possible.
3.定期對閘門的主輪和吊耳軸銷部分進行注油處理。保證兩者的潤滑性,并防止其生銹。
3.
Regularly inject oil into the main wheel and lifting ear shaft pin
parts of the gate. Ensure the lubricity of both and prevent them from
rusting.
4.可以采用集中潤滑的方式來處理閘門內無法取出的滾輪。
4. Centralized lubrication can be used to handle rollers that cannot be removed from the gate.
5.設定專人來定時定點的檢查閘門各部分的焊接處是否有泄露或者破損的情況。
5.
Assign a dedicated person to regularly and fixedly inspect the welding
joints of various parts of the gate for leaks or damages.
